CTDB-IXP425 Product Brief

Hardware Component:

* CPU: Intel IXP425BD, BGA, 533MHz XScale kernel

* SDRAM: 64MB, 32bit PC133(optional 256M)

* NOR FLASH: 16MB, 16bit INTEL NOR FLASH

* NAND FLASH: 32MB Nand Flash（optional）

* USB 2.0 Full Speed(12Mbps): Two usb host interface + one usb device interface             

* USB 2.0 High Speed(480Mbps): USB 2.0 high speed NIC, support four USB HOST high speed port（optional）

* IDE: ATA 133 RAID IDE card, one IDE support two interface HD（optional）

* Gigi-Ethernet: 10/100/1000M, suit Gigi Ethernet card（optional）

* PCI Bus: 32bit, 33MHz~66Mhz, three standard PCI interface, one MINIPCI-III interface

* UTOPIA Bus: 8bit UTOPIA-2,33MHZ

* LAN: Eight 2-layer switch 10/100M Ethernet ports

* WAN: One 10/100Mbps Ethernet port

* RTC: One RTC

* Console: Two RS232 port

* Watchdog: CPU Watchdog

* JTAG: Standard 20-pin JTAG

* LED: One power LED, four automatic light

* Button: One reset button, one GPIO test button

* Size: 20.5cm X 20cm

* Power consumption: 7W, maxim to 10W

Software Component:

BootLoader:

* RedBoot-1.94, Big-Endian & little-Endian

* Support NPE

* Support download by TFTP

* Load and boot Linux

Linux development sets:

* Linux-2.4.27 & linux-2.6.X source code file

* Kernel source code

* Rootfs source code

* Glibc and uclibc source code

* Gcc/gdb source code

Development tools:

* Gcc-4.0.3 + gdb-6.5

* Glibc-2.3/uclibc0.9.29 + binutils-2.6.1

* Auto-configuration of toolchains

Root file system:

* Offer whole sets source code and compressed mapping file base on uclibc & glibc root file system

CTDB-IXP425 Design Document:

CTDB-IXP425 user manual:

* Some knowledge that must be understand in IXP425

* CTDB-IXP425 DEMO board hardware design guideline

* How to compile GCC compiler

* How to compile Redboot(bootloader)

* How to program Flash by Wiggler

* Configuration of Redboot & how to load Linux

* How to create JFFS-V1/JFFS-V2 file system

* How to boot linux system from JFFS2 file system

* How to port uclinux-2.4.x

* How to port linux-2.6.x

* Configuration and creation root file system

* A simple example: such as how to use GPIO control LED

* Function information of Linux on IXP425 board

IXP425 Design Document:

* Redboot 64M recomposed illumination

* Usb Host driver document

* Configuration illumination of wireless network card

* CPLD source code

* Hardware source file:IXP425 KERNEL BOARD V5.DSN (ORCAD 9.1 format)

* layout lib (Powerpcb 5.0 format)

 

CTDB-IXP425 Packed List: 

* One CTDB-IXP425 board

* One non-standard console wire

* 5V-2A power adapter

* One wiggler

* One DVD

 

Optional module/development tools:

* MontaVista Linux BSP & device drivers source code                                    

* Vxworks BSP & device drivers source code

* USB 2.0 high speed module: one usb 2.0 high speed card + design document + LINUX driver source code

* IDE module: One ATA133 RAID IDE card + design document + LINUX source code

* 802.11a/b/g wireless network card module: one 802.11a/b/g minipci wireless network card + design document + LINUX driver source code

* Gigi Ethernet card module: one Gigi Ethernet card + design document + LINUX  driver source code

* Emulater:

1)Banyan-UB ARM ICE

2)Banyan-UE ARM ICE

If any problem please mail to sales@armdev.com.cn, we'll answer your question as soon as possible.